Gtechniq

Gtechniq C4 Permanent Trim Restorer 30ml - C4_0.03

£39.99
  • Gtechniq C4 Permanent Trim Restorer 30ml - C4_0.03

Gtechniq

Gtechniq C4 Permanent Trim Restorer 30ml - C4_0.03

£39.99
  • Description
  • 1 to 2 years durability
  • Restores trim to "as new" condition
  • For use on all exterior trim
C4 utilises a covalent or chemical bond to become an extension of the plastic molecule it's protecting.  Not to be confused with much weaker electrostatic bonds used by, amongst others, ptfe based polymers C4 swaps part of its molecular structure with the surface molecules of your car's trim.
 
What this means is that you now have a protective coating of unparalleled durability.  Unlike many trim products on the market C4 is an exceptionally thin (circa 30nm) optically clear film which means that it does not add an unattractive gloss film to the surface instead it restores all but the most faded trim to an as new condition.  You can expect up to 2 years durability from a single application.
Directions for use:
  • Ensure that you have sufficient product for the job.  If you have a vehicle that has a standard amount of trim that you need to coat such as a Porsche 996, BMW 5 series, then 15ml will be sufficient.  If you have a vehicle that has larger areas of trim that need coating such as a vehicle with black plastic bumpers or cars such as a Mini R53 that has black plastic trim on the sills and wheel arches, you should choose the 30ml bottle
     
  • Do not dilute
  • Apply at a temperature above 5 degrees celsius and not in direct sunlight
  • We recommend wearing protective gloves to prevent the product drying out your skin
  • If you are applying indoors ensure that there is adequate ventilation
  • Ensure that the surface to be coated is entirely free from fats/oils or previously applied products – for this clean trim vigorously with a 1:10 dilution of Gtechniq W2 Universal Cleaner
  • Use the lint free application pads supplied with the C4 Permanent Trim Restorer to spread the coating onto the surface of your trim
  • Once you have spread the product onto a single piece of trim, immediately remove excess product using a Gtechniq MF1 ZeroR Microfibre Buff Cloth 
  • Allow the coating to cure for 12 hours before getting wet