- 6 to 18 months durability
- Highly oil & water repellent
- No change to fabric look or feel
Gtechniq I1 Smart Fabric protects all kinds of fabrics from water and oil based stains. It is breathable and extremely durable thanks to unique Gtechniq 3S Smart Surface Science.
I1 Smart Fabric makes ordinary fabrics waterproof and easy to clean. Use it to prevent soaking, swelling or rotting on any fabric. From sails, tents and awnings to your car’s soft top and interior.
The nano particles of I1 coat each fabric fibre individually, leaving the texture unaffected, allowing the material to breathe. This means stale air will still be able to escape, while repelling water and and oil-based liquids.
Being alcohol based ensures a much deeper penetration of the active ingredient giving an I1 treated surface much better durability and overall performance. Typically an I1 treated surface will last 5 times longer than conventional water repellent coatings, with the lifespan of the product on soft tops for as long as 3 years.
Directions for use:
- To be used only in well ventilated working areas
- Do not dilute
- The surface to be treated must be exceptionally dry, free of dust and dirt, oils and fats
- If the surface requires cleaning we recommend using a 1:10 dilution of Gtechniq W2 Universal Cleaner Concentrate but ensure the fabric is thoroughly dried after cleaning. For convertible roofs we recommend you leave to dry for at least 48 hours in good drying conditions before applying I1.
- Work and apply at a temperature above 5 degrees celcius
- Apply by spraying evenly from a distance of about 20 - 30cm ensuring thorough saturation and allow drying for approximately 2 - 3 hours. NB. You must ensure that your application is thorough as once dried you cannot apply a second coat as the first coat will repel additional product.
- To avoid unsightly residue marks on non absorbent surfaces such as plastic trim, glass, leather and paintwork remove I1 with a microfibre cloth immediately after application or mask up these surfaces prior to application
- After 24 hours the full effectiveness of this product is achieved
- Once the coating has finished working it can be reapplied using the same procedure
- The suitability and the colour-fastness of the material to be treated should be tested prior to the application of the product