Gtechniq

Gtechniq P1 Nano Composite Polish - P1_0.1/P1_0.5/P1_1/P1_3.8

£7.49
  • Gtechniq P1 Nano Composite Polish - P1_0.1/P1_0.5/P1_1/P1_3.8 - Jooji

Gtechniq

Gtechniq P1 Nano Composite Polish - P1_0.1/P1_0.5/P1_1/P1_3.8

£7.49
  • Description
  • One product does work of three
  • Produces durable true finish
  • Gives perfect finish quickly
Gtechniq Breakthrough in nano-structured composite materials have allowed Gtechniq to develop an incredibly uniform abrasive particle on the nanoscopic scale.  This has allowed Gtechniq to manufacture a polish that requires almost no lubrication – giving it three major advantages over traditional polishes: 
  • With many more active particles working the surface, the polish works faster with less effort
  • Virtually no lubricant means there is no ‘drop back’ – the amount of lubricants in traditional polishes are designed to hide minor imperfections which are revealed again when the polish is washed off  - with P1 what you see is what you get
  • Smaller active particle size means the surface does not heat up nearly as much, therefore it is less likely to burn through paint. The lack of heat also means you can make several passes over the same area to remove stubborn scratches, without the fear of over polishing

Plus instead of needing a cutting compound, medium compound, and finishing glaze - all of which require one, sometimes two, polishing pads - used in conjunction with Gtechniq’s pSystem HotSwap Pads, P1 will do the work of these three products with less holograms and as previously mentioned, no ‘drop back’.

Directions for use:

  • Make sure that the surface you are working on is not in direct sunlight and is cool to the touch 
  • Shake the bottle vigorously before using  
  • Ensure polishing pads are clean and free from particulates before use  
  • Ensure all surfaces to be polished are clean and contaminant free as any surface contamination can introduce deeper scratches during the polishing process 
  • Always keep a film of P1 Nano Composite Polish on the surface 
  • As P1 is water based you can reactivate dried polish with a water spray
  • With a rotary we recommend polishing between 900 and 1,200 rpm, but remember when using higher rpm to use faster strokes 
  • P1 can also be used with Dual Action (DA) polishing machines and by hand